Transformer buyers in Conroe, TX for single units or lots
We buy any brand, whether you have one transformer behind a shop or a whole lot released from a project. Equipment can be new in a crate, used and working, retired from service or failed. Our range runs from 10 kVA pole-mounted units to large MVA substation and power transformers. kVA means kilovolt-amperes, a capacity rating; one MVA equals 1,000 kVA.
Conroe is the Montgomery County seat and one of the fastest-growing cities in the country. That growth can leave owners with equipment that no longer matches a building, service upgrade or revised project. We buy transformers in Conroe, Texas, from facility owners, contractors, developers, utility and co-op staff, and oilfield operators.
Our office and yard sit at 6402 McGrew St, Houston, TX 77087. You do not need to arrange delivery there before asking for an offer; we coordinate trucking and pickup with sellers across Texas.
Transformers we buy in Conroe
- Padmount transformers
- Pole-mount transformers
- New surplus transformers
- Dry-type transformers
- 2500 kVA
- 3000 kVA (3 MVA)
- 3750 kVA
- 5000 kVA (5 MVA)
Surplus from Conroe industrial parks and growing properties
Facilities in Conroe Park North and other industrial parks along I-45 may have transformers available after expansion, equipment replacement or changes to production. Oilfield service and manufacturing shops can also have units left over from machinery relocations or electrical upgrades. Tell us whether the transformer is still installed, disconnected on a pad or already stored for removal.
Residential and commercial growth around Lake Conroe can create surplus when plans change or electrical requirements are revised. Developers and contractors may have purchased equipment for a project that now needs a different voltage or capacity. We also buy retired units from properties where the replacement equipment is already operating.
If you want to sell a transformer in Conroe, start with the equipment you actually have rather than waiting for a complete inventory. Send the available nameplate and overall photos, then identify any additional units in the same lot.

Conroe padmount, pole-mount and surplus transformers
Three-phase padmount transformers are a priority for this area. These ground-level, enclosed units commonly serve commercial and industrial loads. As a padmount transformer buyer serving Conroe, we consider both working and failed equipment, including larger units in the sizes listed below. Our padmount transformer buying page covers this equipment category.
For each unit, include primary and secondary voltage: the incoming supply voltage and outgoing load voltage. Photograph the connection compartments only when they are safely accessible through the seller's qualified personnel. Exterior photos and a readable nameplate are the starting point, not a reason to open energized equipment.
- Three-phase padmounts rated 2500 kVA, 3000 kVA or 3 MVA, 3750 kVA and 5000 kVA or 5 MVA.
- Single-phase units from 10–167 kVA, including pole-mount transformers removed from service or held as surplus.
- New surplus transformers still in crates or stored after a project change, with any available purchase or test records.
- Dry-type transformers, which use air rather than insulating liquid for cooling, including 45 kVA units and larger equipment.
What to send for a Conroe transformer offer
Call or text (951) 403-5738, email Industrial832@gmail.com, or request an offer for your equipment. We go over the details and reply with an offer. A readable nameplate helps us identify capacity, voltage, manufacturer and other specifications without guessing from the enclosure.
As a used transformer buyer serving Conroe, we need a clear description of condition as well as electrical ratings. Say whether the unit was operating when removed, has failed, has visible damage or has an unknown service history. Existing test reports can help describe the equipment; send them if you have them.
For a mixed lot, match each nameplate photo to its overall photos and quantity. Labeling photos by unit or inventory number makes it easier to distinguish similar-looking transformers and discuss the same equipment.
- A readable nameplate photo and overall photos showing each unit's exterior and condition.
- Quantity, site location in Conroe or Montgomery County, and whether the equipment is installed or stored.
- Known operating condition, visible damage or leaks, and available dimensions and weight.
- Access information, loading equipment available at the site, and any removal restrictions.
Pickup and loading around I-45 and Loop 336
We coordinate freight and load-out with the seller from our Houston base. For Conroe pickups, explain how trucks reach the property from I-45, SH 105, Loop 336 or SH 242, as applicable. Include gate width, turning room, overhead restrictions and whether the loading area is paved, gravel or soft ground.
Transformer dimensions and weight help determine the trailer and loading arrangement. Tell us if the unit is behind a building, inside a room or on a pad that a truck cannot approach directly. Confirm whether suitable lifting equipment is available and who will operate it.
The unit has to be de-energized and disconnected by the seller or the seller's qualified electrician. You get the price, payment terms and pickup details in writing before a truck is loaded. Include property access rules and scheduling constraints while arranging pickup so the agreed plan reflects the site.
Why assess unused Conroe equipment now
Long lead times for new transformers can make available surplus worth assessing before it sits through another project cycle. A unit that no longer fits your plans may fit another application, but capacity, voltage and condition still matter. Sending the details lets us evaluate the actual equipment rather than assuming every stored transformer has the same use.
Retired and failed units are worth submitting for an offer too. Selling can clear a storage area, release space around a replacement installation or simplify a project closeout. You do not need to wait until you have multiple units; we buy single transformers as well as whole lots.
Montgomery County and nearby areas we serve
We buy throughout Conroe and Montgomery County, including equipment at industrial, commercial and residential development sites. If your inventory spans several properties, provide the quantity and location for each stop. That gives us the information needed to discuss separate pickups or a coordinated load-out.
We also buy in The Woodlands and Katy, along with locations across the Greater Houston and Upper Gulf Coast region. Tell us where the equipment sits now, even if your office or project headquarters is elsewhere.
Frequently asked questions
Do transformer buyers in Conroe, TX purchase failed units?
Yes. We buy working, retired and failed transformers. Send the nameplate, overall photos and known condition, including any visible damage or leaks, so we can assess your unit.
Can I sell one 45 kVA dry-type transformer in Conroe?
Yes. We buy single units, including 45 kVA dry-type transformers. Include voltage information, condition, location and photos with your request.
Can you collect a large padmount from a Conroe industrial site?
We coordinate pickup and trucking. Send dimensions, weight if available, truck access details and information about onsite lifting equipment so we can discuss a workable loading plan.
Can I request an offer while the transformer is still installed?
Yes. Identify it as installed when you send photos and specifications. Before removal, your team or qualified electrical contractor must handle de-energizing and disconnection.
Do I need to bring Montgomery County equipment to Houston?
No. We coordinate pickup with sellers throughout Montgomery County from our Houston base. Share the equipment location and access details when requesting your offer.
